[TenTec] Argosy 525 Query

[Bwana Bob]

I swapped the  same filter into my Corsair years ago. It made a very 
noticeable improvement in skirt selectivity on both SSB and CW. Highly 
recommended!

				73,
				Bob WB2VUF
Mike Hyder -N4NT- wrote:
> It'll be fine without realignment.  Ten-Tec still works on the Argosy.  The 
> 220 filter was the very best thing I did for my Argosy.  It helped CW even 
> more than the 500 Hz filter, so you done good.
> 
> 73, Mike N4NT
> 
> ----- Original Message ----- 
> From: "John, W3ULS" <w3uls at 3n.net>
> To: <tentec at contesting.com>
> Sent: Wednesday, February 21, 2007 6:49 PM
> Subject: [TenTec] Argosy 525 Query
> 
> 
>> I've added the #220 SSB filter in the Argosy 525. The manual says to
>> realign the carrier oscillator.
>>
>> What adverse effects will occur if the oscillator is NOT realigned?
>> (Probably would require a trip to Ten-Tec--if they still work on 
>> Argosies.)
>>
>> 73,
>> John, W3ULS 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>