[TenTec] ORION Display (horizontal line??)

[Allan H. Kaplan]

Richard Williams wrote:
> Allen,
>
> The way I read Bernie's question, he is asking about the thicker solid 
> line that is directly above the spectrum display.   There is a "break" 
> (it becomes a thin line) in it just between the "0" and the next 
> number (.6, 1.2, 2.5, 5, or 10 - depending on the sweep range) to the 
> left.
>
> I read it this way because Bernie says:  "Immediately above the 
> spectrum sweep scope is a horizontal line on which the rectangles 
> representing the bandpasses for the main (left) and sub (right)  
> receivers rest".   The rectangles don't "rest" on the the horizontal 
> line(s) above the filter bandwidth graphic; which you  correctly 
> defined in your response.
>
> Personally, I don't know what the break in the bar represents;  
> interesting question,  do you happen to know the answer?
>
> Dick K8ZTT
>
>
>>
>> ----- Original Message ----- From: <K5XS at aol.com>
>> To: <tentec at contesting.com>
>> Sent: Saturday, January 20, 2007 8:14 AM
>> Subject: [TenTec] O-2 Screen Lines
>>
>>
>>
>>>
>>> > Immediately above the spectrum sweep scope is a horizontal line on 
>>> > which
>>> > the
>>> > rectangles representing the bandpasses for the main (left) and sub 
>>> > (right)
>>> > receivers rest.  The line has a break in it, and it is decidedly off
>>> > center
>>> > (to the lest a bit).
>>> >
>>> > Does that line represent something?  Does the break represent > 
>>> something?
>>> >
>>> > Thanks
>>> >
>>> > Bernie K5XS
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
> Richard,  Thanks.  Now I realize that I mis-read Bernie's message.  
> Off hand, I do not know about the line he mentions, but I shall look 
> into it.   73, Allan, W1AEL
>
>