[TenTec] [orion565] 2.061f computer control problem

[chip_brown at isp.com]

Yes     HRD  is now working like that.  Bet it got bugged with the last
stack indicator change.

Chip  KR1P



> I have the same problem with N4PY software.  The frequency displayed in
> the
> software is CORRECT.  The frequency on the Orion remains at the last
> setting
> when the software was started.
>
> In my case the remote knob changes the frequency on the virtual Orion in
> software BUT does nothing on the rig display itself.
>
> If I Poll the Orion (an option available in the software), the software is
> much slower of course, but, the rig follows the software.
>
> Back to the previous version I'm afraid.
>
> 73,
>
> Rick
> VE7TK
>
> Website:  http://www3.telus.net/ve7tk
>
> --------------------------------------------
>
> Subject: Re: [TenTec] [orion565] 2.061f computer control problem
> From: "John T. Fleming"
> Date: Thu, 17 May 2007 06:57:36 -0400
>
>
> I found the same problem with Ham Radio Deluxe.  When I click on a DX
> spot,
> it moves to that frequency, but will shows the original frequency until I
> touch the knob.
>
>
>
> 73,
>
> John
>
>
>
>   _____
>
> From: orion565 at yahoogroups.com [mailto:orion565 at yahoogroups.com] On Behalf
> Of Martin Kratoska
> Sent: Thursday, May 17, 2007 4:58 AM
> To: orion565 at yahoogroups.com
> Subject: [orion565] 2.061f computer control problem
>
>
>
> Dear Orioners,
>
> since update to 2.061f a new problem appeared: if clicking onto spot in
> my favorite logging program the radio tunes properly, the program
> displays corect frequency but the main display on the radio stays on
> previous frequency. A short touch to main tuning knob corrects this
> problem, the main display jumps to the correct freuency.
>
> Tested with Logger32 and xdx/xlog/hamlib in linux - both the same. No
> problems with 2.060b and below. Master reset does not cure the hanging
> display.
>
> Anybody has similar problems?
>
> Otherwise also noted a distortion on strong signals if the AGC response
> set to FLAT. I appreciate the NR function which shoes a significant
> improvement (compared to 2.060b). The CW sidetone artifacts also nearly
> completely (90%) disappeared.
>
> 73,
> Martin, OK1RR
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>



-----------------------------------------
Join ISP.COM today - $8.95 internet , less than 1/2 the cost of AOL
Try us out, http://www.isp.com/