[TenTec] Orion II AM Mic Adjustment

ac9s at mchsi.com ac9s at mchsi.com
Tue Oct 2 15:52:12 EDT 2007


I have begun to play with AM on the O2 and it appears the microphone settings 
are significantly different than with SSB.  I am running a Heil Goldline 
through an NCS multiswitcher.  With the current gain setting on the NCS box I 
have the red led on the O2 flickering with the O2 software mic setting at 18.  
Today I checked in with an AM group on 3875khz and was informed that my audio 
was light.  Sure enough, there was no flicker on the led.  I turned the mic 
gain almost up to 100 - I could see increased gid current on my amplifier, but 
never a sign of the led lighting.  The group informed me the audio level had 
increased, but that it was still a little on the light side.

Does the LED work on AM?  Should the mic gain be radically different between 
SSB and AM?  I didn't see anything specific in the manual.

Thanks for any input on the proper way to set the mic gain on AM.

Keith
AC9S


More information about the TenTec mailing list