[TenTec] Orion RIT...

[John Huffman]

John -

Please keep us posted on your successes.  I guess, non-successes, also.

73 de K1ESE
John

John T. Fleming wrote:
> Roy,
> 
> I have decided I am going beat this problem.  I am going to remove the case
> from my Orion and remove the screws from the front panel.  Then I plan to
> put a board under the front of the chassis to tilt the display.  When the
> problem shows again, I am going to remove the front panel.  If the problem
> cures itself, I will start checking the ribbon cables.  If nothing is cured,
> I am going to start probing around the encoder board with a plastic tool and
> see if I can find the problem.  If that fails, I will try to "cold" spray
> and see if that shows the source of the problem.  I will either be having a
> glass of champagne in celebration or crying in my beer with frustration! :=}
> 
> 73,
> John
> 
> -----Original Message-----
> From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
> On Behalf Of Roy
> Sent: Monday, July 07, 2008 12:19 PM
> To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] Orion RIT...
> 
> "For those who have experienced this.... what were your resolutions?"
> 
> 
> Snap it hard with your finger.
> 
> 73,  Roy   K6XK
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>