[TenTec] 4CX-1600B conversion

alan geller alan_geller2001 at yahoo.com
Sun Jun 1 16:04:07 EDT 2008


Hello All,
Svetlana USA appears to have morphed into SED USA and the  4CX-800A which
is the "improved" version of the GU-84 appears to be in full production.
My Emtron DX-1b is quite happy with it's GU-74, but I hope St. Petersburg is still
pumping out 4CX-800A's when mine croaks. The russians seem to stick with rugged
parts that keep on working.
Sometimes our Aussie friend's statements are a bit selfserving.

alan/K6ADG


----- Original Message ----
From: Dave Heil <k8mn at frontiernet.net>
To: Discussion of Ten-Tec Equipment <tentec at contesting.com>
Sent: Sunday, June 1, 2008 10:55:42 AM
Subject: Re: [TenTec] 4CX-1600B conversion

Jim Miller wrote:
> Several years ago when the 4CX-1600B amps were discontinued by Alpha,
> QRO,
> & Ten-Tec, I wrote Ray @ QRO ad asked, in a worse case scenario, would
> my HF-3KDX be converted to a pair of 4CX-800's, and he replied he had
> done the mod on a couple of the HF-3KDX's.
> So a pair will fit in the space of a 4CX-1600B of the QRO, I'm sure it
> would work with the Titan II. Have no info on the Alpha 6.

I don't know if I'd want to do that mod since the 4CX-800's seem to be 
discontinued now as well, this according to the nice 
Slovenian/Australian fellow at the Emtron booth at Dayton.

Dave Heil K8MN
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec



      


More information about the TenTec mailing list