[TenTec] Lowest loss matching an antenna for my Argonaut 509

Gary Hoffman ghoffman at spacetech.com
Wed May 7 22:36:49 EDT 2008


Cebik has designs for Baluns  (and Ununs) with many different impedance
ratios.


----- Original Message ----- 
From: "Jim WA9YSD" <wa9ysd at yahoo.com>
To: <tentec at contesting.com>
Sent: Wednesday, May 07, 2008 10:04 PM
Subject: [TenTec] Lowest loss matching an antenna for my Argonaut 509


> 150 ohms at resonance you say  thats 3:1  Thats a tuff one to find unless
Palomar Engineering or Amidon still making made to order specialty baluns.
A 4:1 would be about 25% less effecient or power loss being radiated out.
Been years since I last ordered anything from them.
>
> Maybe feed it with narrow space open feed line that is home brewed, to a
low loss tuners looks like it is easier to make it happen.  A company use to
sell ladder line spaced about 1 1/2 inches using 1/8 inch plastic dowel type
spacers, and the spacers were about a foot apart or so.  You do not want to
use the web type ladder line cause it has a much higher line loss.
>
> Keep The Faith, Jim K9TF/WA9YSD
>
>
>
>
____________________________________________________________________________
________
> Be a better friend, newshound, and
> know-it-all with Yahoo! Mobile.  Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>




More information about the TenTec mailing list