[TenTec] Balun Isolator

[pfizenmayer]

Stuart - that has been done also  - by and Engineer at Belden I think - I
cant remember right now who did it but if I find it again I will send it .
He used a "triaxial method " with the coax under test inside another outer
conductor .

http://www.tennadyne.com/pdf/coaxial_tenn.pdf I was wrong it was Times Wire 
and Cable - here is a link to the Tennadyne site that has the paper. Alos 
says much was in QST in April 1981.

73 Hank K7HP



> That is a good project for someone to measure how much current passes
> thru the 5 per cent open space.  Since the shield wires criss cross in
> good woven shields, there may be more shorting of the current, than you
> would expect.  The shield density affects the bending radius of the
> cable and its flexibility.  Of course, using less shield wires lowers
> the cost of production.