[TenTec] PBT and hi low cut

[Charles Harpole]

OM Kam taught me the following and it works GREAT>>>>> de HS0ZCW





NOTES ON ORION ONE from Kam N3KS, May 2008



CUT and PBT/BW buttons:



+CUT:  on usb or cw, use H.

             on lsb use L.

    Use CUT to adjust the BW (not BW knob).



+PBT:  Always on PBT (not BW ever).





SETTINGS by Menu



+RX Menu:

          -"PBT track" on.

          -"BW Track" on

          -"Hardware NB" to off.

          -"PBT/BW Step" to +10.



+SSB Menu:

          -4

          -3000

          -200 to 300

          -BOTH



+AUDIO button:

          -TX EQ to -14 to -20 (gives more highs)

          -RX EQ to -11 (gives more highs)

          -Sub EQ to -8  (gives more highs).





+STEP at 10 or 100



+SP in speech processor to 6 or 8.






Charles Harpole HS0ZCW
k4vud at hotmail.com









> From: brazos at rochester.rr.com
> To: tentec at contesting.com
> Date: Fri, 16 May 2008 17:33:34 -0400
> Subject: [TenTec] PBT and hi low cut
>
> Hello I was on the air today with my Orion II and I was getting some interference from a nearby station I tighten up the band pass filter and started playing with the PBT and hi - lo cut . I realized that I still don't understand the operation of these controls to move the offending stations or move away from this station. I fiddled with these controls and was unable to remove the offending station the controls seemed to do very little if anything . Is there a good explanation of how to use these controls some where . One question , do I have to have the pbt light on before I attempt to use the H or L cut feature ? Thanks John kb2huk
>
> --
> I am using the free version of SPAMfighter for private users.
> It has removed 1889 spam emails to date.
> Paying users do not have this message in their emails.
> Get the free SPAMfighter here: http://www.spamfighter.com/len
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec