[TenTec] mic

[Stuart Rohre]

Most recent (10 years) Ten Tec transceivers have been designed for low 
impedance mikes.  Check your manual just to be sure there is not an 
option in a menu for high impedance.  Check the Classic manual for its 
options as well.  However, I have used high impedance dynamic mikes and 
a high impedance crystal mike on my Scout with good reports.

Yes, the Classic mic is a real looker, it is designed after a classic 
RCA broadcast mic of the 1930's that was used until the 70's.
-Stuart
K5KVH