[TenTec] mic

[John Molenda]

Thanks Stewart .  John
----- Original Message ----- 
From: "Stuart Rohre" <rohre at arlut.utexas.edu>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Tuesday, August 11, 2009 3:09 PM
Subject: Re: [TenTec] mic


> Most recent (10 years) Ten Tec transceivers have been designed for low 
> impedance mikes.  Check your manual just to be sure there is not an 
> option in a menu for high impedance.  Check the Classic manual for its 
> options as well.  However, I have used high impedance dynamic mikes and 
> a high impedance crystal mike on my Scout with good reports.
> 
> Yes, the Classic mic is a real looker, it is designed after a classic 
> RCA broadcast mic of the 1930's that was used until the 70's.
> -Stuart
> K5KVH
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec