[TenTec] Omni VI - AGC and RF Gain Question

[waltk8cv4612amos at att.net]

The button next to the AGC fast / slow, to the left, is the AGC ON / OFF 
button, and it should be OUT not pushed in !

Walt K8CV Royal Oak, MI.


----- Original Message ----- 
From: "Bruce Warner" <kansas4000 at hotmail.com>
To: <tentec at contesting.com>
Sent: Tuesday, January 27, 2009 12:58 PM
Subject: [TenTec] Omni VI - AGC and RF Gain Question



Hi - I purchased an Omni VI through this list recently, and just have a 
general question.  When I have the RF gain fully clockwise then engage the 
AGC either in slow or fast, it distorts the speaker, but when I pull back on 
the RF gain a few notches (say to the 3 o'clock position) then the AGC no 
longer distorts and it picks up the signal while reducing the background 
noise.  I don't have a copy of the manual, so is this the normal setting to 
back off the RF gain when using the AGC (or do I have a problem with my 
rig)?  Thanks.
_________________________________________________________________
Windows Live™: E-mail. Chat. Share. Get more ways to connect.
http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t2_allup_howitworks_012009
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec