[TenTec] Corsair (I) problem

[w8au at sssnet.com]

At 10:27 PM 3/30/2009, John Farler wrote:
>A friend has a Corsair
>It died - no transmit, no receive.   Just a readout in the 9000 range.
>What to look at first????  I know that's the if range...

The "Accessories" plug on the rear panel (where the Remote PTO
cable is inserted) must not be allowing the PTO signal to feed
the mixer circuits.  Check the jumper wires in the plug.
Or the socket pins themselves...

Perry  w8au