[TenTec] WTB: 302R Remote Tuning Pod for Omni VII

[N4PY2]

I don't remember if the 301 knob had an adjustable drag on it or not.  But
if you run the O7 with my N4PY software, I have a software parameter you can
set to adjust the knob sensitivity.  This is an easy solution.

73,

Carl Moreschi N4PY
121 Little Bell Drive
Hays, NC 28635
www.n4py.com


----- Original Message ----- 
From: "E VICKNER" <rfchoke at verizon.net>
To: "N4PY2" <n4py2 at earthlink.net>; "Discussion of Ten-Tec Equipment" 
<tentec at contesting.com>
Sent: Sunday, October 18, 2009 3:28 PM
Subject: Re: [TenTec] WTB: 302R Remote Tuning Pod for Omni VII


> Hi Carl,
>
> When I saw the recent postings about the 302 remote encoder it brought up 
> a
> question that I have wondered about for some time.
>
> Before selling it, I originally used an Omni V with a 301 remote encoder.
> Subsequently I picked up a Omni VII with a 302 remote encoder.  I really
> like the Omni VII, however I find that there is no way to adjust the 
> "drag"
> on the 302 tuning knob like you can do on the Omni VII by holding the knob
> skirt and rotating the knob.
>
> Since I don't have the 301 any more for comparitive purposes, was it just
> the weight of the 301's knob or was there a way of adjusting the drag on
> that remote encoder.
>
> It seems that all I have to do is just touch the 302's case and the
> frequency jumps.  Can one of the older knobs be used on the 302?
>
> 73          Ed    K2ZE
> ----- Original Message ----- 
> From: "N4PY2" <n4py2 at earthlink.net>
> To: "mathenyr at marietta.edu" <null at mx.marietta.edu>; "Discussion of Ten-Tec
> Equipment" <tentec at contesting.com>
> Sent: Sunday, October 18, 2009 2:43 PM
> Subject: Re: [TenTec] WTB: 302R Remote Tuning Pod for Omni VII
>
>
>> Yes, the Orion and Omni VII  (and also Jupiter/Pegasus) use the same pod.
>>
>> Carl Moreschi N4PY
>> 121 Little Bell Drive
>> Hays, NC 28635
>> www.n4py.com
>>
>>
>> ----- Original Message ----- 
>> From: "Ralph Matheny" <mathenyr at marietta.edu>
>> To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
>> Sent: Sunday, October 18, 2009 2:07 PM
>> Subject: Re: [TenTec] WTB: 302R Remote Tuning Pod for Omni VII
>>
>>
>>> If it's the same as the one for the Orion I have one.  It
>>> isn't "perfect" but is "nice", I don't use it and would
>>> send it out on approval.  I have no idea what it is worth
>>> these days.
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec