[TenTec] Omni A-D Series B project Con't

[Louis Ciotti]

I have just been using the spray "contact" cleaner.  Going to see if
the local RS has some De-oxit today and go from there.

Yes this is the digital one, and the following bands to not show the
correct frequency 3.5, 7, 29, and 29.5, and AUX.  I assume AUX is not
working because the crystals are not there.

On Wed, Mar 31, 2010 at 10:09 PM, David Goncalves
<davegoncalves at gmail.com> wrote:
> One carefully executed application, and several rotations of the control,
> should do it. Its a neophyte's error to put too much contact cleaner. 2-3
> drops in to the holes of the plastic switch wafer cover is alot.
>
> BTW, this is the digitial one, right? Do all of the bands come up with the
> right frequency displayed on the digital readout?
>
> David Goncalves
> W1EUJ
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>