[TenTec] Omni-D (Ser B) - Popping on some 10m bands

[David Goncalves]

Dude, threadjacking?

David Goncalves
W1EUJ

On Tue, Apr 6, 2010 at 3:58 PM, W8BVH <w8bvh at sbcglobal.net> wrote:

> Greetings to the net:
> I have a stock Corsair II that has been idle for about 4 months due to some
> family health issues. I turned it on yesterday and found the display only
> reads 9.0000 or 91.0000 no matter what band you select. I know that there
> was a discussion about this some time ago but was unable to find the answer
> in the archives. Can someone give me a hint?? I opened the top and removed
> the filters and lossened up the screws on all of the boards that I could
> reach from the top and re-tightened them. I removed all of the plugs on the
> boards, one at a time, and re-seated them. All to no avail. Thanks to all
> in
> advance for your patience and the bandwidth. Oh, I'm using the 961 power
> supply.
> Best regards,
> Ralph Howes
> W8BVH
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>



-- 
David Goncalves