[TenTec] Jupiter 538 always on transmit

[Eric Skaggs]

Yes, I had this problem yesterday...turned out to be a faulty ACC 1 cord....after re-setting it all worked well.
73- eric w7nnn

 



 
> To: tentec at contesting.com
> From: f8ehj at free.fr
> Date: Sun, 8 Aug 2010 16:41:05 +0200
> Subject: [TenTec] Jupiter 538 always on transmit
> 
> Hello,
> 
> After a long time without radio operating (about 6 months), I wished 
> to turn on my tansceiver Jupiter 538.
> When I powered on, the TT jupiter is always transmiting on Ham radio 
> Band.
> I test all modes, bands, it is like the PTT or CW key are pushed.
> I performed a master reset (A CONTROL KEY PUSHED and POWER SWITCH 
> TURNED ON) and downloaded lastest firmware version (1.32) without 
> success.
> I tested with schematic help the input signals CW KEY (from jack on 
> front panel) and PTT (from ACC1). They are no short circuited.
> 
> Did anyone have this problem ?
> 
> Best 73's
> 
> Herve F8EHJ
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec