[TenTec] TITAN 425 PS maintenance

[Jim Brown]

On 12/3/2010 10:11 AM, CSM(r) Gary Huber wrote:
>   am looking for comments from anyone who has used this board.

I am a STRONG believer in "If it an't broke, don't fix it."   If 
something in the P/S later fails and you can't easily replace it, THEN 
think about that board. At this point though, all the parts that could 
fail (other than the transformer) are readily replaceable with the 
either same parts or good alternates.

FWIW -- on my three Titans, the only failures I've had in the P/S are a 
few filter caps and some that burned up due to a HV short in the RF 
deck. I'm an active contester, so my amps see a lot of use.

73, Jim K9YC