[TenTec] OMNI VII & MMTTY

d.e.warnick at comcast.net d.e.warnick at comcast.net
Tue Dec 28 11:37:21 PST 2010



Gary, 

You'll have to set the serial port to: 

57,600 baud 

8-bits 

no parity 

RTS/CTS signaling 



You'll have to pass: 

tmt data 

rcv data 

sig grd 

rts 

cts 



If you're 9-pin connectors on both ends, that's straight through on pins 2, 3, 5, 7 & 8 



That'll get the N1MM working 



The RTTY will then work with just a TT 712 cable from computer to Omni VII 



Dave 

WA3F 


----- Original Message ----- 
From: "Gary Grogg" <gwgrogg at comcast.net> 
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com> 
Sent: Tuesday, December 28, 2010 1:30:50 PM 
Subject: Re: [TenTec] OMNI VII & MMTTY 

Thanks Dave for info.  Yes I also had mine set up with an OMNI VI+ and it was working fine.  I will reset it and try it. 

Gary K4VIG 

-----Original Message----- 
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com] On Behalf Of d.e.warnick at comcast.net 
Sent: Tuesday, December 28, 2010 1:04 PM 
To: Discussion of Ten-Tec Equipment 
Subject: Re: [TenTec] OMNI VII & MMTTY 



Got mine on Christmas Eve. Once the comm was set up and N1MM was working, all I did was plug in a TT 712 interface cable and go to the digital screen on N1MM. MMTTY came up and worked fine. Of course, I had the system working with my Omni VI+ before, so I just replaced that with the Omni VII and interface cable. Did away with all the odds and ends of cable and the old interface. Love it. 



Was your N1MM and MMTTY  working with a rig before, or is this a new installation? 



Dave 

WA3F 


----- Original Message ----- 
From: "Gary Grogg" <gwgrogg at comcast.net> 
To: TenTec at contesting.com 
Sent: Tuesday, December 28, 2010 12:48:23 PM 
Subject: Re: [TenTec] OMNI VII & MMTTY 

Got a new OMNI VII for Christmas and am attempting to get RTTY up and 
running.  No problem with receive.  If anyone is using MMTTY with true FSK 
and the OMNI VII, I would appreciate any help.  I have an interface, but was 
hoping to bypass that.  Thanks. 

   

Gary K4VIG 

_______________________________________________ 
TenTec mailing list 
TenTec at contesting.com 
http://lists.contesting.com/mailman/listinfo/tentec 
_______________________________________________ 
TenTec mailing list 
TenTec at contesting.com 
http://lists.contesting.com/mailman/listinfo/tentec 

_______________________________________________ 
TenTec mailing list 
TenTec at contesting.com 
http://lists.contesting.com/mailman/listinfo/tentec 


More information about the TenTec mailing list