[TenTec] FS: Corsair II & External VFO

[Malcolm McLeman]

George, re your display problem.
Open up the display cover. I found a small metric socket spanner fits those 
awful TT self-tapping screws but no doubt a US standard will be better.
Remove and replace the display unit strip plug a few times and see if that 
cures your seven seg display prob.
It worked for me...
73 Malcolm/F5VBU
----- Original Message ----- 
From: "George E. Clark" <clageog at yahoo.com>
To: <tentec at contesting.com>
Sent: Tuesday, February 23, 2010 5:39 PM
Subject: [TenTec] FS: Corsair II & External VFO


> Corsair II with 500 Hz filter and external VFO.  $650 for the pair plus 
> actual shipping cost.  Both are in good shape cosmetically and 
> functionally.  Priority given to buyer who can pick up in Stow, MA.
>
> The transceiver has two very minor issues-- (1) the lower right bar on 
> some of the LED numbers in the frequency readout doesn't come on all the 
> time.  I have operated fine with this for years because you can still tell 
> what the numbers are.  If you want to correct this, it will require what I 
> expect will be a relatively simple resolder.  (2) It is missing the 
> shorting plug that goes on the tx in/out jack on the back of the rig, so I 
> use a short stereo speaker cable instead, works fine.
>
> George, W1XW
>
> http://people.fas.harvard.edu/~clark5
>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>