[TenTec] Corsair AGC problem

[CSM(r) Gary Huber - AB9M]

The frequency display is most likely another deOxit session for pins of connectors of the display board, display driver, counter, time base, etc. no adjustments or re-soldering unless the display or display driver board has been damaged by placing connectors on the wrong pins.

73,

Gary - AB9M


--------------------------------------------------
From: "g p" <n2wjw at yahoo.com>
Sent: Saturday, January 16, 2010 6:13 PM
To: <tentec at contesting.com>
Subject: [TenTec] Corsair AGC problem

> Spent a little more time with the Corsair today and noticed an intermittent AGC and found some components with loose soldering joints in the IF AF board, re-soldered them, got some deOxit for the controls and all is fine now, great receive on this rig, this old rig is slowly coming back to life
>  
> Now for the next headache and hopefully the last....the frequency display, that's another posting.
>  
> Thanks to all that helped out on and off the TT archives.
>  
> Gil
>  
>  
> 
> 
>      
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>