[TenTec] Jupiter power issue

[ROD]

did you do a reset

--------------------------------------------------
From: "Michael Goins" <wmgoins at gmail.com>
Sent: Saturday, July 31, 2010 2:00 PM
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Subject: [TenTec] Jupiter power issue

> Putting the Jupiter station back together and I seem to have a problem.
> 
> When I hook the rig via the wattmeter to a dummy load and put the
> internal Jupiter meter in "power" and key the rig, I show 20 watts,
> regardless of where it is set on the power range in the Jupiter's
> menu. When I am at 0 in the menu, I have 20 watts. At 50%, 20 watts.
> At 100%, 20 watts. I am running the output through an external meter
> to the dummy load, and the internal meter matches what the external
> meter is showing.
> 
> I am new to the Jupiter, and I don't know if it's me missing something
> or having something in the wrong position, or if I have a power output
> issue, but it's got me worried.
> 
> Mike, k5wmg
> Pipe Creek, Texas
> Fast cars, slow boats, big dogs, old trucks, little radios, and
> summers off to write
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>