[TenTec] Titan 425 Initial Tune-Up settings - high VSWR

[Jim Brown]

On 11/24/2010 8:04 PM, CSM(r) Gary Huber wrote:
> I use the recommended (by TenTec) method of tuning the TITAN 425....
> alternate TUNE and LOAD for maximum power out for a given drive,
> increase/decrease drive and adjust TUNE and LOAD for max power out to the
> desired level.

That is exactly right. And doing that will also minimize grid current, 
which is the main factor in tube life.

73, Jim K9YC