[TenTec] OT: Indoor antenna
Ron Notarius W3WN
wn3vaw at verizon.net
Tue Nov 30 08:27:50 PST 2010
I have an S9 antenna; picked it up last year and then plans changed. It's a very nice antenna, but it is not structurally robust enough to masquerade as a flag pole.
That aside, I think you missed my point.
Yes, there are several commercial flagpole antennas available. That is to say, base loaded (for the most part) verticals that look like a flag pole.
Nor is is that hard to take a commercial flagpole and base-load it to act as a vertical.
And there are many commercial fiberglass flag poles that can be acquired, for a price. Running a wire through the center of one isn't very difficult. Putting a tuner at the base isn't either. I've heard of more than a few hams who have done this. Even a few who've used a commercial fiberglass light support, such as those you find around parking lots.
But my point was... I don't know of any current amateur radio antenna manufacturer who is making a fiberglass (or other non-conductive outside) flag pole with a hidden internal wire antenna, that has place INSIDE at the base a screwdriver-antenna type assembly, to make about as "stealthy" a remote tuned hidden antennas as you can get. Considering the vast availability today of screwdriver-style tunable inductors, it seems so obvious that I'm just a little surprised that it hasn't happened.
Yet.
73, ron w3wn
Nov 30, 2010 11:07:22 AM, tentec at contesting.com wrote:
There are several commercial flagpole antennas available, and S9 antennas come very close to your description.
-----Original Message-----
From: Ron Notarius W3WN
To: 'Discussion of Ten-Tec Equipment'
Sent: Mon, Nov 29, 2010 6:24 pm
Subject: Re: [TenTec] OT: Indoor antenna
All that being said... I wonder why no one has marketed a flag pole antenna,
using a hollow fiberglass pole, a solid copper wire in the center, and the
equivalent of a screwdriver antenna (the rotating inductor) safely hidden
internally at the base. You'd think there'd be a market for this. But that
is probably a discussion for an antenna related forum... and I thank you for
permitting the distraction here...
73, ron w3wn
-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Rob Atkinson
Sent: Monday, November 29, 2010 2:54 PM
To: tentec at contesting.com
Subject: Re: [TenTec] OT: Indoor antenna
I think it is a real shame that things have reached the point where we
hams have to put up these sneak antennas, as if we are doing something
illegal, or operating spy stations in enemy terretory.
The ham magazines just about every month run articles about hams who
are so happy with their hidden stealth antennas which I believe only
gives lawyers more evidence to use in court when they are going after
some poor ham who has dared to put up a decent antenna and his town is
going after him to get it down.
If you have a high profile dipole way up in the air and you are happy
and you wind up in court and the other side lays out all these
magazine articles about how this or that ham got WAS with his secret
night time telescoping antenna or hidden wire under his eaves, or
closet slinky and how he's just delighted working everything he can
hear, he's going to have a hard time convincing a non-technical judge
that those antennas are unsatisfactory and his high dipole, or quad,
or beam are really needed.
If a ham has to get by with a stealth antenna okay, but the magazines
(CQ, QST and Electric Radio as far as I know) ought not to portray
these antennas as highly satisfying.
my opinion and worth what you paid for it.
Rob
K5UJ
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
More information about the TenTec
mailing list