[TenTec] Orion 565 serial port failure (Again!)

Martin Sole hs0zed at csloxinfo.com
Thu Oct 14 20:47:50 PDT 2010


Thanks,

It seems to be working again now. Or at least I was eventually able to load
code into it and it seems okay. The symptoms were that the firmware loader
was telling me it could not find the rig and halted. I disabled the halt on
errors and managed to see data on the input to the MAX232. A couple of times
it stopped at about 50 lines or so but eventually it went right through.
Still wouldn't boot though but re-trying again, this time with halt on error
enabled it found the rig and loaded the code. Then it worked. That was
pretty late last night and I haven't done anything else other than switch it
on this morning and the serial port seems to be working okay.

I rather suspect a poor or bad cable or connector. Time will tell I guess.

Back to playing with audio again when I get some time.

Martin, HS0ZED


-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Richards
Sent: 15 October 2010 02:24
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Orion 565 serial port failure (Again!)

Have you tried unplugging the rig and letting it stand for awhile.
Dumb as it sounds, I have revived various computer systems this way, whereas
no efforts to reboot, clear the BIOS to factory settings,
or other forms of flashing the system would work.   Sometimes just a
little time off with no power applied does it.

No guaranty, but this is a free item to try as I understand these radios are
kinda designed like computers inside.

Just something to try while waiting for other suggestions.

Good luck.  ============== K8JHR  =========================

----------------------------------------------------------------

On 10/14/2010 12:24 PM, Martin Sole wrote:

Power cycling,
> master resets, RAM clear resets all result in it sitting with a SYSTEM 
> LOADING screen permanently. Only the flash update mode can be entered 
> but without any serial comms nothing happens.

=================================================================
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec



More information about the TenTec mailing list