[TenTec] The Eagle

[Paul Christensen]

Probably the most significant way to sway TS-590 purchasers over to the 
Eagle is to include a 9 MHz I.F. port for use with LP-PAN, SDR-IQ, or QS1R 
as a panadapter and second Rx.  For the minimal manufacturing effort, I just 
cannot see how this one significant feature could be overlooked with the 
full production unit.  At the very least, a panel hole for a BNC jack should 
be provided for those that want to add their own I.F. buffer, like that 
manufactured and sold by Jack Smith at Clifton Labs.

Paul,  W9AC

----- Original Message ----- 
From: "Richards" <jruing at ameritech.net>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Sunday, September 26, 2010 4:57 PM
Subject: Re: [TenTec] The Eagle


> OK... I can follow that.    Thanks for the additional gloss.
>
>
> ======================  JHR  ============================
>
> On 9/26/2010 16:41, Rick - NJ0IP / DJ0IP wrote:
>> Richards, I made that statement about having degrade GC receivers if they
>> are in a transceiver; but it is NOT true for the Omni VII.
>
>> The receiver is only degraded when you are trying to receive at or near 
>> the
>> IF frequency (i.e., 9 MHz).
>> It is not degraded across the rest of the GC spectrum.  Sorry for the
>> confusion.
>>
> ===========================================================
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec