[TenTec] The Eagle

[Bill Rowlett]

And just how many TS-590 owners are using those or even know what they are? Not half as many as some of you think I am sure.
 
73  KC4ATU  Bill
 
> From: w9ac at arrl.net
> To: tentec at contesting.com
> Date: Sun, 26 Sep 2010 17:25:46 -0400
> Subject: Re: [TenTec] The Eagle
> 
> Probably the most significant way to sway TS-590 purchasers over to the 
> Eagle is to include a 9 MHz I.F. port for use with LP-PAN, SDR-IQ, or QS1R 
> as a panadapter and second Rx. For the minimal manufacturing effort, I just 
> cannot see how this one significant feature could be overlooked with the 
> full production unit. At the very least, a panel hole for a BNC jack should 
> be provided for those that want to add their own I.F. buffer, like that 
> manufactured and sold by Jack Smith at Clifton Labs.
> 
> Paul, W9AC
> 
> ----- Original Message ----- 
> From: "Richards" <jruing at ameritech.net>
> To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
> Sent: Sunday, September 26, 2010 4:57 PM
> Subject: Re: [TenTec] The Eagle
> 
> 
> > OK... I can follow that. Thanks for the additional gloss.
> >
> >
> > ====================== JHR ============================
> >
> > On 9/26/2010 16:41, Rick - NJ0IP / DJ0IP wrote:
> >> Richards, I made that statement about having degrade GC receivers if they
> >> are in a transceiver; but it is NOT true for the Omni VII.
> >
> >> The receiver is only degraded when you are trying to receive at or near 
> >> the
> >> IF frequency (i.e., 9 MHz).
> >> It is not degraded across the rest of the GC spectrum. Sorry for the
> >> confusion.
> >>
> > ===========================================================
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec