[TenTec] Corsair II speaker source?

Barry N1EU barry.n1eu at gmail.com
Sat Feb 26 10:25:22 PST 2011


Thanks Mike, but that speaker won't fit unless there's an easy adapter
plate that could be fashioned.  I'm measuring rectangular mounting
hole spacing 3-3/8 in wide, 2 in deep.

73, Barry N1EU


On Sat, Feb 26, 2011 at 5:54 PM, Mike Hyder -N4NT-
<Mike_N4NT at charter.net> wrote:
> When I studied for my commercial telegraph license, I learned of the
> requirements for maintaining spare tubes.  When I spent about three years in
> Ethiopia, that lesson was reinforced as to other parts as well.  If what I
> have will help Barry, I'll send it on out (even if Jameco denies the part
> number).
>
> 73, Mike
>
> ----- Original Message -----
> From: "Dr. Gerald N. Johnson" <geraldj at weather.net>
> To: <tentec at contesting.com>
> Sent: Saturday, February 26, 2011 12:44 PM
> Subject: Re: [TenTec] Corsair II speaker source?
>
>
>> Jameco doesn't admit that part number today.
>>
>> 73, Jerry, K0CQ
>>
>> On 2/26/2011 11:22 AM, Mike Hyder -N4NT- wrote:
>>> The Jameco 99995 measures 2.5 inches side to side.  The mounting slots
>>> are
>>> two and one-eighth inches along either edge -- not on the diagonal.  The
>>> speaker is just under one-inch deep and has a much larger magnetic
>>> structure
>>> than the original.
>>>
>>> See if that would fit your radio.
>>>
>>> 73, Mike N4NT
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>


More information about the TenTec mailing list