[TenTec] Pegasus Control, new PC, port problems

[Richards]

Gee... I don't mean to be contrary, but not always.   Sometimes I have 
to go in and set it myself.  You told me to do that last week when I was 
messing with all three radios on the program... it did not figure the 
baud rate itself, but when I selected the baud rate, it worked.

Maybe this is partly a function of the particular USB-Serial adapters I 
am using?
I wonder if they are all reporting the right info back to the program... 
the TenTec converter cable for the RX-320D works fine, but the USB port 
on the  TS-590s sometimes needs a nudge.  The $5 Cheapo Chinese cable 
works sometimes, other times needs a nudge - it is spotty, but works 
when I manually select the setting.

So maybe the cables are the issue and the software is precluded from 
setting the baud rate by a hardware quirk ?  At least  that is the way 
it seems to me.

------------------
Happy Trails.
=======================  Richards / K8JHR  =========================

On 6/19/2011 07:29, Carl Moreschi wrote:
> The N4PY program sets the baud rate itself, so that is not an issue.