[TenTec] Orion 2 query L/S on 2nd receiver.

[Mark van Wijk]

One more thing.......

Never use any outboard (DSP) processor for the audio. The greatest asset of the ORION is its ability of a wonderfull recovered audio presentation. 

Use your RF Gain, never set it above 90. Ever. Not even on 10/12mtrs.

So, .....actually two :)

73, Mark,PA5MW


On 9 nov. 2011, at 11:29, Dave G3RXP <g3rxp at btinternet.com> wrote:

> Hi Barry and Mark thanks for the info - I think the internal L/S is disabled 
> when the external L/S is plugged in, the same with headphones - but Ill 
> check those suggestions again.
> Just thinking about it I have my headphones connected to the back exp L/S 
> via an external DSB audio filter so that may be the problem.
> 
> 
> Thanks  Dave
> 
> ----- Original Message ----- 
> From: "Barry N1EU" <barry.n1eu at gmail.com>
> To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
> Sent: Wednesday, November 09, 2011 9:28 AM
> Subject: Re: [TenTec] Orion 2 query L/S on 2nd receiver.
> 
> 
>> On Wed, Nov 9, 2011 at 9:18 AM, Dave G3RXP <g3rxp at btinternet.com> wrote:
>> 
>>> I would like to monitor the 2nd RX by loudspeaker and use the headphones 
>>> for the main RX and wondered what is the best method to do this. I could 
>>> use the line output socket at the back but I may have missed an easy 
>>> option?
>> 
>> Why not use the EXT SPKR output on the rear panel (or just the Orion's
>> internal speaker) with Audio configured as Left/Right=Main and
>> Spkr=Sub?
>> 
>> Barry N1EU
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec