[TenTec] help with Corsair II tx/rx off freq issues

[Joe]

Gentlemen,

The problem has been solved. The RIT pot, which is now associated only with 
the DDS, was not properly connected. Nothing related to the Corsair II here. 
Thanks for your help. I appreciate it and I am sure Scott does as well.

Joe
----- Original Message ----- 
From: "Barry N1EU" <barry.n1eu at gmail.com>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Monday, November 21, 2011 6:56 AM
Subject: Re: [TenTec] help with Corsair II tx/rx off freq issues


> Dumb question but doesn't that pot simply adjust the center position
> of RIT/XIT so that there's no offset when RIT/XIT is engaged, until
> you turn the knob off-center?
>
> Barry N1EU
>
>
> On Mon, Nov 21, 2011 at 7:43 AM, Mike Hyder -N4NT-
> <Mike_N4NT at charter.net> wrote:
>> I believe, sir, that you are mistaken. I trust my experiences over your
>> opinion. But hey, why not try to discourage the fellow from trying a very
>> simple test?
>>
>> Mike N4NT
>>
>> ----- Original Message -----
>> From: "Steve Hunt" <steve at karinya.net>
>> To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
>> Sent: Monday, November 21, 2011 7:34 AM
>> Subject: Re: [TenTec] help with Corsair II tx/rx off freq issues
>>
>>
>>> If the problem is still present when the Offset Tuning is off, it can't
>>> be the balance of those pots. With the OT switched off, the *same* pot
>>> signal is used both for Tx and for Rx.
>>>
>>> 73,
>>> Steve G3TXQ
>>>
>>> On 21/11/2011 04:27, Mike Hyder -N4NT- wrote:
>>>> Scott, I believe there is an internal pot which balances the RIT pot on
>>>> the
>>>> front panel. It sounds like it is not set correctly. Hope that's your
>>>> trouble for it's an easy fix.
>>>>
>>>> 73, Mike N4NT
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>