[TenTec] Argosy--low power problem

[wa3fiy at radioadv.com]

Argosy or Argosy II?   BIG difference.

-Lee-


> I have been doing some work on my Argosy and would appreciate anyones help on increasing the power output...the issue seems to be more on the low power side than when teh PA is switched on (its a low/hi power setting on back up to 50 w)...I have gone thru and adjusted the bias for the low level and PA--all to spec
> 
> my out puts are as follow
> 
>            low setting        high setting
> 
> 80        1w                        45w
> 
> 40        3 w                       50w
> 
> 30        2.5 w                    50w
> 
> 20        2.5w                    20w
> 
> 15        1w                        25w
> 
> Not the end of the worss but i would like to run it in the low switched position with about 4 or so watts if possible. Appreciate any tips others may have.
> 
> cheers
> 
> scott va3ied
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>