[TenTec] Fwd: OmniVI logic board work
Barry N1EU
barry.n1eu at gmail.com
Thu Sep 29 11:59:09 PDT 2011
On Thu, Sep 29, 2011 at 2:22 PM, Glenn <wa4aos at aol.com> wrote:
> The test I would like to perform is with two weak signals, less than S1 in the passband and an S 9 signal 2 KHz above then 2KHz below the passband.
> My guess is the K3 may get the nod here due it's close in dynamic range. However, I know how bad the K3 resolves multiple signals close together
> at .1uv. I'll need to increase the output of the generators enough so that the K3 does clearly resolve/process the two signals.
My two cents:
- don't bother with the strong off-channel signal; the K3 and the O6
fitted with IR cw roofing filter will easily handle this
- it's really not that important that the two closely separated
signals be that weak; the K3's failure to separate closely spaced
signals occurs regardless of signal strength in my experience
Barry N1EU
More information about the TenTec
mailing list