[TenTec] audio from the I/O connection at the back of the Orion

[d.e.warnick at comcast.net]

Check your manual for the DIN jack. Mine is item #80 on page 28 & it states that Pin 4 of the DIN connector is 'line level audio output. Which receiver(s) are output to here and the level of audio sent to the jack are controlled by the Line Out Src and Line Out Level commands in the Other menu." 

73 

Dave 

WA3F 



----- Original Message -----


From: "jack" <jfriend31 at comcast.net> 
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com> 
Sent: Saturday, December 15, 2012 1:34:36 PM 
Subject: [TenTec] audio from the I/O connection at the back of the Orion 

Question: is there a way to turn down the audio gain from the I/O DIN 
connection on the back the Orion? 

I have 2 Orions and have them connected to a Yankee Clipper SO2R+ which 
feeds the audio thru to headphones. turning down the main and sub AF gain 
does NOTHING to the I/O gain thru the DIN connector. 

there is much too much volume in the headphones. the output is so loud thru 
the SO2R box that I can use the headphones as a speakers. in fact right now 
I am listening without problem to a CW chat on 17 meters with the headphones 
on the desk. 

thanks, 
jack 
ak7o 


_______________________________________________ 
TenTec mailing list 
TenTec at contesting.com 
http://lists.contesting.com/mailman/listinfo/tentec