[TenTec] audio from the I/O connection at the back of the Orion

[jack]

thank you, jack
ak7o


-----Original Message----- 
From: d.e.warnick at comcast.net
Sent: Saturday, December 15, 2012 7:46 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] audio from the I/O connection at the back of the Orion



Check your manual for the DIN jack. Mine is item #80 on page 28 & it states 
that Pin 4 of the DIN connector is 'line level audio output. Which 
receiver(s) are output to here and the level of audio sent to the jack are 
controlled by the Line Out Src and Line Out Level commands in the Other 
menu."

73

Dave

WA3F



----- Original Message -----


From: "jack" <jfriend31 at comcast.net>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Saturday, December 15, 2012 1:34:36 PM
Subject: [TenTec] audio from the I/O connection at the back of the Orion

Question: is there a way to turn down the audio gain from the I/O DIN
connection on the back the Orion?

I have 2 Orions and have them connected to a Yankee Clipper SO2R+ which
feeds the audio thru to headphones. turning down the main and sub AF gain
does NOTHING to the I/O gain thru the DIN connector.

there is much too much volume in the headphones. the output is so loud thru
the SO2R box that I can use the headphones as a speakers. in fact right now
I am listening without problem to a CW chat on 17 meters with the headphones
on the desk.

thanks,
jack
ak7o


_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec