[TenTec] OMNI D ser B low power output--still no joy

[scottsheppard at videotron.ca]

well, I have replaced all diodes save the zenor, the small signal transistors have also been replaced with 2n3904's and I have bypassed the PA all together...have virtually no output---maybe something in teh QRPp range...hardly moves needle at all on the SWR (Fwd) pos...

I do note my 'T' voltage is only 9.4 as opposed to 10.4...my meter may be off a bit but thats over a volt...can the T voltage be adjusted?

Sincerely appreciate all the input I have rec'd...
scott