[TenTec] Omni 6 / 563 Frequency Display

[Ken Brown]

>
> I recently borrowed a friend's Omni 6 (Model 563) recently and the receive
> and transmit frequencies are not netted (they're about 430 Hz apart).  Can
> someone explain how to 'net' the TX/RX (other than via the RIT/XIT)?
The 20 MHz oscillator on the Logic Board has to be right. Everything 
except the BFO is phase locked to it, when it is all working. The BFO 
also has to be right. The manual explains how to adjust them.

DE N6KB