[TenTec] Orion II SAF issue when left on and power down then power up

[Kim Elmore]

Ummmm... Not 3.0xxxa on my O II, but 3.033xa. Even with typos, I'm not experiencing the problem. Crummy band conditions are another story entirely. 

Kim N5OP

"People that make music together cannot be enemies, at least as long as the music lasts." -- Paul Hindemith

On Aug 31, 2013, at 13:41, Kim Elmore <cw_de_n5op at sbcglobal.net> wrote:

> I'm running 3.0xxxa on my O II and do not have that problem.
> 
> Have you tried any of the various resets?
> 
> Kim N5OP
> 
> On 8/31/2013 1:18 PM, Mike Chatfield wrote:
>> I am running version 3.033xa just installed a couple of days ago. I noticed an interested problem with the SAF.
>> If I leave SAF (Main Receiver) on and power down, then bring the Orion II back on I get NO receive audio (mostly just popping noise) on the Main receiver. In order to get the audio to work I must shut off SAF then do a power cycle, it works fine then.
>> As long as I remember to shut off the SAF BEFORE powering off everything works fine.
>> As anyone seen this issue?
>> Not a big deal but it looks like a firmware issue...
>> 
>> Mike
>> W0BBC
>> 
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec