[TenTec] Orion II SAF issue when left on and power down then power up

[Mike Chatfield]

Thanks for the info, I will try a RAM clear and Master Reset. Its not a 
big issue now that I know to shut off SAF before a power off.

Tnx n 73
Mike
W0BBC
On 8/31/2013 7:29 PM, Kim Elmore wrote:
> Ummmm... Not 3.0xxxa on my O II, but 3.033xa. Even with typos, I'm not experiencing the problem. Crummy band conditions are another story entirely.
>
> Kim N5OP
>
> "People that make music together cannot be enemies, at least as long as the music lasts." -- Paul Hindemith
>
> On Aug 31, 2013, at 13:41, Kim Elmore <cw_de_n5op at sbcglobal.net> wrote:
>
>> I'm running 3.0xxxa on my O II and do not have that problem.
>>
>> Have you tried any of the various resets?
>>
>> Kim N5OP
>>
>> On 8/31/2013 1:18 PM, Mike Chatfield wrote:
>>> I am running version 3.033xa just installed a couple of days ago. I noticed an interested problem with the SAF.
>>> If I leave SAF (Main Receiver) on and power down, then bring the Orion II back on I get NO receive audio (mostly just popping noise) on the Main receiver. In order to get the audio to work I must shut off SAF then do a power cycle, it works fine then.
>>> As long as I remember to shut off the SAF BEFORE powering off everything works fine.
>>> As anyone seen this issue?
>>> Not a big deal but it looks like a firmware issue...
>>>
>>> Mike
>>> W0BBC
>>>
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>