[TenTec] A/B rig testing

[GARY HUBER]

I agree, I run my OMNI-VII with minimum RF gain to produce audio out of the 
LINE OUT and with the AF gain set to ZERO. From the OMNI-VII LINE OUT, audio 
is run through an AOR TD-370 DSP audio filter to a stereo headset or J-hooks 
which drive the T-coils of my hearing aids. One thing you have to remember 
about the OMNI-VII is, if you run the RF gain too high, it WILL over drive 
the DSP circuits.  Do it right and it’s a great radio.

DISCLOSURE:
This is to inform all persons, I am a TenTec Ambassador and I receive 
compensation according to the TenTec Ambassador program.

73 ES DX,
Gary -- AB9M

-----Original Message----- 
From: Richards
Sent: Wednesday, January 30, 2013 11:54 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] A/B rig testing

It is hard to judge from here, without knowing how each rig was set up.
  But interesting nonetheless.  The Omni VII is just another radio if it
is not set up right.

-------------------------- JHR -------------------------


On 1/29/2013 12:46 PM, Paul DeWitte wrote:

> I did a little bit of A/B/C testing on 160M with my Omni VII, Peg's
> Eagle, and my Corsair II.

_____________________________________
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec