[TenTec] A/B rig testing

[Rick - DJ0IP / NJ0IP]

Jeff, even that is not good enough unless you are running the test on the
right day at the right time.
Most radios perform well most of the time, as long as the bands are not
over-crowded with California Kilowatts.

I tested my K3 and my Eagle against each other during CQWW DX CW in 2010.
If there is any place you're going to see a difference, it's there.
Well I couldn't see any noticeable difference.  Both rigs were great.
(So I sold the K3!).

73
Rick, DJ0IP

-----Original Message-----
From: TenTec [mailto:tentec-bounces at contesting.com] On Behalf Of W8KZW
Sent: Saturday, February 02, 2013 4:37 PM
To: tentec at contesting.com
Subject: Re: [TenTec] A/B rig testing

No, best is an Antenna Multicoupler and listen to multiple radios
simultaneously.

Jeff
W8KZW


-... Best is to use a switch to switch between radios and listen for more
than a few seconds.

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec