[TenTec] 238A-C roller inductor

[denton sprague]

usually that is what I do also…I have worn out two of those mfj antenna analyzers so far!
On Jun 18, 2013, at 5:01 PM, "Robert Mcgraw" <rmcgraw at blomand.net> wrote:

> Unless you have a physically damaged roller and associated hardware, I've
> found a good cleaning and very light application of contact cleaner will
> restore the items to good condition.
> 
> As a general practice, never adjust the roller with any significant power
> applied. I always use my antenna bridge to make my tuner adjustments.
> 
> 73
> Bob, K4TAX
> 
> 
>> Got a nice used(again)238A TT tuner and the roller inductor is getting a
>> tad long in the tooth…
>> Priced a new one out of TT but can't justify it right now.
>> Has anyone installed an aftermarket inductor in  their TT tuner…if so,
>> can you send me the details. Thanks...
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>> 
> 
> 
> -- 
> Disclosure:
> I am a Tentec Ambassador and compensated according to the Tentec
> Ambassador plan. I serve as a volunteer beta test person for the Omni
> VII, Eagle and Argonaut VI products.   Otherwise, I hold no business or
> employment interest with Tentec.
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>