[TenTec] Need 962 diagram

[Bob McGraw - K4TAX]

Be sure and tighten the two screws on the large filter cap and be sure the 
metal bracket holding the filter cap is secure to the chassis.  I've found 
that the metal bracket is often somewhat floating above ground.  The result 
is the problem you describe.

73
Bob, K4TAX


----- Original Message ----- 
From: "John Farler" <k4avx1 at windstream.net>
To: <tentec at contesting.com>
Sent: Wednesday, March 13, 2013 6:55 PM
Subject: [TenTec] Need 962 diagram


>I have a TT 962 power supply that came with the Omni 6+.
> It has an 24v ac component on the output that I believe indicates
> the filter caps are bad or perhaps the full wave rectifier.
>
> Anyway, I have no diagram of the circuitry and am hoping some
> one can scan and mail a copy or the whole manual, if someone
> has it in pdf format. The manual for the power supply is not on
> on the Ten-Tec old manuals page.
>
> Thanks in advance.
>
> John, K4AVX
> k4avx1 at windstream.net
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>