[TenTec] Orion 565 no audio or transmit

[Carl Moreschi]

Pull the front panel and spray all the cable connectors.  Unplug each 
connector, spray them, and then plug them back in and out at least 10 
times to clean them.  There's at least 100 connections in there, each 
one with its own symptom.  That fixed mine when I had an intermittent 
problem.  The fact that the problem is intermittent points to a cable 
connection.

Carl Moreschi N4PY
121 Little Bell Dr.
Hays, NC 28635
www.n4py.com

On 5/15/2013 3:36 PM, John Huffman wrote:
> The last two days I have had an intermittent problem with my Orion 565.
> I have no receive audio or just white noise. When this happens no
> transmit output over 1 watt. Screen shows proper tuning and mode
> selections, but you can't hear anything or only hear white noise.
>
> Any ideas before I send it in?
>
> 73 de K1ESE
> John
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>