[TenTec] Antenna is up, but the coupler doesn't like 160 meters

Mike Bryce prosolar at sssnet.com
Tue Oct 15 12:19:29 EDT 2013


that experiment will have to wait until I can get down to the shack..

mike

Mike Bryce, WB8VGE
 the heathkit shop
SunLight energy systems
J e e p
o|||||||o






On Oct 15, 2013, at 11:07 AM, Jim GM wrote:

> Is your antenna a single wire dipole, Folded dipole, what? Trying to figure
> out your feed point impedance.
> 
> Try placing a coil about 10 to 12 turns of #12 insulated wire between each
> half of your feed line, see if you can tie wrap the coils close together
> looking like a coil and not bunched up wire. Coil can be 2 to 3 inches OD.
> Wind on a smaller form cause it will expand out to a larger size.  Does
> not have to look pretty. You may have to put capacitance across it. try
> this at the end of the feed line at the tuner first. if it works try it at
> the antenna and feed line.
> 
> -- 
> Jim K9TF
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 



More information about the TenTec mailing list