[TenTec] Orion 2 and ANC 4 Noise Canceller

[Carl Moreschi]

A mod would be needed since the Orion does not have receive loop 
connections.  This is exactly the mod that is done to the Omni VII by 
adding the two wires from Tentec.  But Tentec did not put in these 
connections for either of the Orion's.

Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com

On 4/6/2014 9:32 PM, Toby Pennington wrote:
> I would like to connect an ANC 4 Noise Unit into the receive only path
> of the Orion 2 in order to bypass having to deal with the TX/RX relay in
> the noise unit.
>
> I know other rigs have this capability built in (such as the Icoms and
> the K3, maybe others) where you can easily patch the noise unit into the
> receive line without worrying about the noise canceller T/R relay
> switching giving you problems.
>
> Does anyone know of a way to do this on the Orion with existing outlets
> on the back of the Orion 2, or would it entail a mod of some kind.
>
> Thanks for any help!
>
> Toby K4NH
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>