[TenTec] Paragon II LSB/USB audio differences.

[Robert Mcgraw]

The BFO oscillators likely need alignment.  Follow the sequence in the
manual.

73 Bob, K4TAX

> i have set  Reference oscillator , and the BFO's on the rig.
>
> Rig is on frequency as discussed a week or so ago.
>
> My issue is this.
>
> USB sounds great on transmit.
>
> LSB, however, is thin. Narrow, like you are talking through a 1.8-2.1 kHz
> filter.
>
> I tried another 2.4 filter in 9mHz slot, with no change.
>
> Can someone tell me what to adjust to move the USB and LSB transmits more
> to the center of their respective ranges.
>
> I am happy with the rig so far, but it is obvious that LSB needs an
> adjustment, and of course, it is not the BFO.
>
> I have a friend who wants the rig, and I would like to make it perfect
> for him.
>
>
> Thanks for any help.
>
> Mark
> K8VF
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>


-- 
Disclosure:
I am a Tentec Ambassador and compensated according to the Tentec
Ambassador plan. I serve as a volunteer beta test person for the Omni
VII, Eagle and Argonaut VI products.   Otherwise, I hold no business or
employment interest with Tentec.