[TenTec] OMNI D question

[Robert]

As one that can remember..... 
the D-104 on a G Stand would work and sound nice.  

At the Huntsville Hamfest yesterday I saw no less than 10 on one table. 

73
Bob K4TAX


Sent from my iPhone

> On Aug 17, 2014, at 10:37 PM, Neil Martinsen-Burrell <neilmartinsenburrell at gmail.com> wrote:
> 
>> On Sun, Aug 17, 2014 at 9:44 PM, Al Gulseth <wb5jnc at centurytel.net> wrote:
>> 
>> "Back when" I had surprisingly good success with cheapie Hi-Z dynamic mics
>> designed for 11 meter rigs ;)  Another possibility (which requires building
>> an adapter to enable PTT) would be one of the older Radio Shack dynamic PA
>> mics which can be set for 50K impedance. I've used both types and always
>> received good audio reports.
> 
> 
> I wasn't even alive "back when", but I depend on cheap old gear to enable
> my radio habit.  I am a particular fan of the Turner brand CB mics and have
> successfully used both an SSB+2 desk mic and a model 350 hand mic with my
> Omni C.   An eBay search for "Turner CB mic" should turn up some
> possibilities.
> 
> I'm sure that those who remember "back when" could suggest other good
> quality brands and models to look for.
> 
> -Neil KD0UKC
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec