[TenTec] Eagle tuning rate options?

[P C A]

Tnx for the offer RON. The few times that I use a computer I use my XYL's work computer. I have no need for one in the Shack.
TNX AGN , Andy 

> Date: Wed, 9 Jul 2014 14:33:58 -0500
> From: wn3vaw at verizon.net
> To: tentec at contesting.com
> Subject: Re: [TenTec] Eagle tuning rate options?
> 
> If you need another computer for use in the shack, and don't mind an older one, it can be arranged.
> 
> 
> On 07/09/14, P C A wrote:
> 
> Not all of us use computers or have N4PY software. The two items are to rich for my blood. Would be nice to have your money.
> 
> > 
> > 
> > No matter of what the value is, some will want it different.
> > 
> > I just control the radio with software and forget about it. That way it 
> > does exactly what I want.
> > 
> > Software from N4PY does a wonderful job.
> > 
> > 73
> > Bob, K4TAX
> > 
> > 
> >
> > 
> > 
> > > Unfortunately NO, and as you say, 10Hz is too fine and 100 Hz too coarse.
> > > If you are at 100 Hz and want to go to 10 Hz, you have to push the button 
> > > 4
> > > times.
> > > I wish there was a 50 Hz step.
> > > That would probably be a good compromise.
> > >
> > > 73 - Rick, DJ0IP
> > > (Nr. Frankfurt am Main)
> > >
> > >
> > > -----Original Message-----
> > > From: TenTec [mailto:tentec-bounces at contesting.com] On Behalf Of Barry 
> > > N1EU
> > > Sent: Wednesday, July 09, 2014 4:37 PM
> > > To: Discussion of Ten-Tec Equipment
> > > Subject: [TenTec] Eagle tuning rate options?
> > >
> > > Had a quick question for Eagle owners out there. I see that you can vary
> > > the tuning rate by changing the vfo step by factors of 10 (1hz, 10hz,
> > > 100hz, etc). Is there also a slow/fast encoder setting like the Orion?
> > > 10X seems like a huge jump in tuning rate or maybe I'm missing something.
> > >
> > > I was watching the video at https://www.youtube.com/watch?v=olPBH7UH6sk 
> > > and
> > > the tuning looks too slow for ssb. He seems to be using 10hz step. On 
> > > the
> > > other hand, I know that 100hz step would normally be too coarse for ssb. 
> > > I
> > > assume you couldn't quickly toggle between 10hz and 100hz - you would have
> > > to cycle through all six step sizes?
> > >
> > > Thanks/73,
> > > Barry N1EU
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec at contesting.com
> > > http://lists.contesting.com/mailman/listinfo/tentec
> > >
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec at contesting.com
> > > http://lists.contesting.com/mailman/listinfo/tentec
> > > 
> > 
> > 
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec