[TenTec] Scout has vy low Pwr out on some bands

[geoffrey mendelson]

On 7/15/2014 10:36 PM, Rick - DJ0IP / NJ0IP wrote:
> PROGRESS!
>
> I used a very pointed needle nose pliers to scrape a bit on the LPF pins of
> the 40m module and immediately had full power.
>
> So, "that's" the problem.
>
> I will find a way to clean all of the modules pins.
> Not yet sure how, but I will find something.
>

Normally I would say DeOxit and a cotton swab, but since you are in 
Germany, Cramolin. Make sure to put it on the swab sparingly, and use a 
dry one to remove it.

If it looks pitted or worn, get some Stabilant-22 to put on after 
cleaning it. DeOxit also sells simlar compounds, one for gold and one 
for other metals, but the Stabalint is the original and best.

Geoff.

-- 
Geoffrey S. Mendelson 4X1GM/N3OWJ
Jerusalem Israel.